You are here: Home STORE Microcontrollers Legacy Products 68HC11 Adapt11C24DX

Technological Arts Inc.

Your Shopping Cart

Your Cart is currently empty.

PDFPrint

Adapt11C24DX feed

Product Info

Introduction. Adapt11C24DX is a family of compact, intelligently designed boards containing all the elements common to practically every 68HC11 design. Clock circuitry (crystal), reset circuitry (including a pushbutton), a mode select switch, a 5-Volt regulator, and an RS-232 interface are all provided on-board. All of the microcontroller I/O and control lines are brought out to a versatile 50-pin header pattern on the printed circuit board. This allows for several different connector options, to support a wide variety of applications.

Product Detail


Rapid Deployment. The most popular option is the solderless breadboard connector (shown above), which enables the module to be plugged vertically into a solderless breadboard, and treated like a 50-pin DIP in your application. The 68HC11 Special Bootstrap mode combined with the on-board RS232 interface make in-circuit re-programming effortless via the COM port of virtually any computer. This provides an ideal low-cost platform for application development, product prototyping, hobby projects, and educational use.

Commitment. When the application development stage is finished, the module may be removed from the breadboard and embedded into the end-product. This may be a user-designed printed circuit board, wire-wrap board, or perfboard; or it could be a Backplane or a Prototyping card offered especially for use with Adapt11. A number of accessories are available to give the user a high degree of flexibility without spending a lot of time and money.

How do I use Adapt11 modules to quickly try out my design ideas?

Easy! Just follow these steps...

 

  • Plug any Adapt11C24DX module into your solderless breadboard or application board
  • Wire up your application circuits (switches, motor drivers, LEDs, sensor circuits, etc.)
  • Write software for your application in your favourite language-- C, BASIC, or assembler (freeware/demo versions of each are included with Starter Packages)
  • Compile or assemble your program, producing an s-record file
  • Attach a serial cable (included in Starter Packages) between your PC COM port and the Adapt11C24DX serial connector
  • Switch the module to BOOT mode, apply power, and use our MicroLoad downloader (or your favorite loader) on your Windows PC
  • In approximately 30 to 90 seconds-- depending on program size, your software will be ready to run
  • Switch Adapt11C24DX to RUN mode, and press RESET. It is now running your code!
  • Make changes to hardware/software, as required, and repeat previous 3 steps


UNIQUE FEATURES. Adapt11C24DX modules are great for schools because they are inexpensive and can be re-programmed thousands of times! They are the perfect way for students to learn electronics, computer fundamentals, and how to design hardware & software for microcontrollers. The 68HC11 is a powerful, popular, and easy-to-use microcontroller. A solderless breadboard means there is no need to solder parts (i.e. they can be used over and over). For permanent designs, just use Adapt11 Modular Prototyping accessories, such as Backplanes & Prototyping cards. Or build your circuit on perfboard, printed circuit board, or wire-wrap board, and plug Adapt11C24DX into it.

MORE ON-BOARD MEMORY. Some applications need expanded memory but also need all the I/O lines. That is why Adapt11C24DX was developed. It includes expanded memory and a port replacement unit (to replace the ports that become address and data bus lines in expanded mode). Note: since the 50-pin connector is used entirely for I/O ports, the address and data lines on these boards are not accessible to the user. The net effect of this standardized 50-pin I/O connector is that all Adapt11 family members are pin-for-pin interchangeable (with minor limitations), so if you run out of program space with one module, you can replace it with a module having more memory. The modular, pluggable design makes this upgrade effortless.

POWER REQUIREMENTS. All Adapt11 family modules include a low-power, low-dropout regulator on-board. If your application hardware already supplies regulated 5VDC, you can use that to power the board. Alternatively, you can supply unregulated 5 to 15 VDC via the external power connector and take advantage of the on-board regulator. A 9VDC adapter will do just fine; a 9V battery can be practical if your application takes advantage of the low-power WAIT and STOP features of the 68HC11, to manage power consumption.

BUFFALO MONITOR. The BUFFALO ROM-resident Debug/Monitor program can be used to varying degrees with all Adapt11 family members. To use BUFFALO, simply plug a 68HC11E9BCFN2 chip into the MCU socket. This chip has 512 bytes of EEPROM which can be used to store a user program. While 512 bytes may not sound like much, it is possible to take advantage of subroutines already present in the 8K BUFFALO ROM on the chip to do many of the tasks needed in a typical program.
Many 68HC11E0 and 68HC11E1 chips already have BUFFALO in ROM, but it is simply disabled (via the ROMON bit in the CONFIG register). In such cases, the ROM can simply be enabled and many of the features of BUFFALO can be utilized by the user.

EVB REPLACEMENT. Freescale (formerly Motorola) discontinued the 68HC11 EVB a few years ago. For those wishing to use a similar configuration, we offer a couple of alternatives.

  • Adapt11C24DXEVBSP: This is a low-cost configuration which includes BUFFALO in ROM and 20K RAM for user programs. It has our standard 50-pin I/O connector.
  • EVB11: A physically bigger version of Adapt11C24DXEVB, this board features the same 60-pin connector and almost the same circuit design as the original Freescale (formerly Motorola) 68HC11 EVB. This board is meant for those who have already invested time and money in creating add-on circuitry for the original EVB, and need to retain the 60-pin connector feature.

 

Resources

Note:  this is a legacy product, so this page is not being maintained.  Some of the URLs may not work.

Visit our Support Library for manuals, data sheets, app notes, and code examples.

Third Party Courseware and Examples:




Sort by:

Adapt11C24DX EVB Starter Package w/ BUFFALO

Order Code: AD11C24DXEVBSP
USD $129.00
Average customer rating:
0 stars  Total votes: 0
Plugs into your solderless breadboard for easy interfacing. Includes BUFFALO monitor in ROM and 32K RAM for developing your programs. 
Product Details...

Adapt11C24DX 32K Module (without MCU and PRU)

Order Code: AD11C24DXM32K
USD $70.00
Average customer rating:
0 stars  Total votes: 0
OEM or replacement module with 32K EEPROM on-board. You supply 68HC11 and 68HC24 chips (socketed). 
Product Details...

Adapt11C24DX 60K Module (without MCU and PRU)

Order Code: AD11C24DXM60K
USD $79.00
Average customer rating:
0 stars  Total votes: 0
OEM or replacement module with 32K EEPROM and 28K RAM on-board. You supply 68HC11 and 68HC24 chips (socketed). 
Product Details...

Adapt11C24DX OEM Module with 32K RAM (without MCU and PRU)

Order Code: AD11C24DXRM32K
USD $42.00
Average customer rating:
0 stars  Total votes: 0
OEM or replacement module with 32K RAM on-board. You supply 68HC11 and 68HC24 chips (socketed). 
Product Details...

Adapt11C24DX 32K Starter Package

Order Code: AD11C24DXSP32K
USD $139.00
Average customer rating:
0 stars  Total votes: 0
Plugs into your solderless breadboard and provides 32K EEPROM for your program. 
Product Details...

Adapt11C24DX 60K Eval Package with BUFFALO

Order Code: AD11C24DXSP60K/B
USD $149.00
Average customer rating:
0 stars  Total votes: 0
Plugs into your solderless breadboard. Includes BUFFALO monitor in ROM, 32K EEPROM of non-volatile storage for your program, and 28K RAM for data variables or to use while developing your program. 
Product Details...


  • «« Start
  • « Prev
  • 1
  • Next »
  • End »»


Display #  
Results 1 - 6 of 6
Select & click to change


List All Products


Advanced Search





Forgot your password?
Forgot your username?
No account yet? Register