You are here: Home STORE Microcontrollers 9S12 Adapt9S12X Modules Adapt9S12XS256 MCU Module

Technological Arts Inc.

Your Shopping Cart

Your Cart is currently empty.

PDFPrint
Adapt9S12XS128 MCU ModuleAdapt9S12ZVC, USB and RS232

Adapt9S12XS256 MCU Module
View Full-Size Image


Adapt9S12XS256 MCU Module

Order Code: AD9S12XS256M
Price: USD $85.00

:

:


 

Product Info

Overview:

The Freescale 9S12XS microcontroller is a low-cost, stripped-down version of the S12XE, omitting the XGATE co-processor, Memory Protection Unit, and Emulated EEPROM. It features the high-performance CPU12X core, operating at up to 40 MHz, additional addressing modes, and fast 16-channel high-resolution analog-to-digital converter subsystem (12-bit resolution and 3us conversion time). The MC9S12XS has full 16-bit data paths throughout.

Adapt9S12XS joins the "Adapt" Modular Prototyping System (AMPS) pioneered by Technological Arts. Unlike conventional evaluation and demo boards offered by other vendors, the flexible design of this system addresses the varied requirements of evaluation, training, product development, proof-of-concept prototyping, and even volume production.

MCU Features:

The MC9S12XS256 includes 256K bytes of Flash, 12K bytes of RAM, and 8K bytes of DataFlash. Peripheral subsytems include:

  • two asynchronous serial communication interfaces (SCIs)
  • one serial peripheral interface (SPI)
  • one 16-bit timer module (TIM), supporting:
    • 8-channel Input Capture/Output Compare
    • overflow interrupt
    • pulse accumulator
  • one 4-channel 24-bit Periodic Interrupt Timer (PIT)
  • one 16-channel, 12-bit analog-to-digital converter
  • 8-channel pulse-width modulator (PWM)
  • one MSCAN 2.0A, B software compatible module (MSCAN12)

The following list summarizes the differences between the S12XS family and the S12 family.

  • 40MHz operation
  • extended CPU instruction set
  • additional Condition Code Register
  • programmable eight level interrupt controller
  • enhanced Memory Management Controller
  • new four channel Periodic Interrupt Timer
  • new low-power RC trigger and fast recovery from STOP modes
  • decimal prescaler for Real Time Interrupt module
  • improved SCI featuring hardware bit manipulation for LIN
  • enhanced trigger source options for Analog to Digital Converters
  • amplitude-controlled Pierce oscillator
  • wider and deeper debug module

Product Details

Module Overview:

Implemented in an "AdaptS12" form factor board, Adapt9S12XS256 is compatible with an entire range of application cards, prototyping cards, and backplanes, and usable with solderless breadboards ("proto boards"). The module includes all necessary support circuitry for the MCU, as well as a 5-Volt regulator, dual RS232 transceivers, and one CAN transceiver on-board.

Module Features:

  • 9S12XS256J0 MCU (112-pin)
  • 4 MHz crystal
  • bus speed up to 40MHz (using on-chip PLL)
  • accommodates optional user-supplied oscillator
  • automotive-grade low-dropout 5V regulator (mounted on rear)
  • 12K RAM
  • 8K Data Flash
  • 256K high-endurance Flash
  • independent Flash blocks permit execution from one block while programming/erasing another block
  • fast in-circuit programming
  • Background Debug Mode (BDM) fully supported for loading and debugging user code
  • universal 6-pin/10-pin BDM connectors support BDM pods from multiple vendors (we recommend our low-cost USBDMLT pod)
  • RS232 transceivers provided for two SCI channels
  • one physical-layer high-speed CAN transceivers (PCA82C250)
  • 8-channel Input Capture/Output Compare Timer
  • 16-channel 12-bit analog-to-digital converter
  • 8-channel PWM subsystem
  • periodic interrupt timer
  • includes reset button
  • accommodates optional precision voltage reference chip for analog-to-digital converter
  • 2.30" x 3.25" (83mm x 58mm) standard Adapt9S12 form-factor card
  • two 50-pin connectors (H1 and H2) bring out all I/O pins of the MCU
  • all I/O pins on a 0.1" grid for easy interfacing to standard perfboard
  • versatile connector options for use with solderless breadboards, prototyping cards, or embedding into your design
  • stackable vertically or horizontally
  • convenient corner mounting holes
  • ideal development platform for all 9S12XS variants

What's included:

  • assembled, tested module, ready for use via BDM pod
  • red and black power connector wire (#PCJ1-8)
  • printed schematic/pinout sheet
  • find data sheets, manuals, and all other resources for this product by clicking on the Resources tab, above

If you require mating connectors, browse Connectors in the Components category at the left. For power supplies, browse the Accessories category.

Before you order...

All of our standard connector options are available for this board. The product photo above shows "RA1" connector on both H1 and H2. Please make your choice of connectors before adding this item to your shopping cart. Otherwise, the board will be shipped with the default option (i.e. no connectors on H1 and H2).

Attention volume users!

We can customize this module to suit your needs (e.g. different crystal/oscillator, different MCU variant, selectively populated communications transceivers, etc.). Please contact us for a quote.

 


Availability

Usually ships in:

1day.gif

Customer Reviews:

There are no reviews yet for this product.
Please log in to write a review.


Select & click to change


List All Products


Advanced Search





Forgot your password?
Forgot your username?
No account yet? Register